Kuhn disc mower without conditioner rear attachment

We have a number of different disc mowers from the Kuhn brand that are suitable for mounting on the rear of the tractor in our range. There is a choice of mowers with a side suspension or a middle suspension of the cutting unit.

• KUHN GMD 16, 20, 24 en 28 disc mowers

The disc mowers from the GMD 10 series are available in different working widths; from 1.60 m to 2.80 m. A number of innovations have been implemented to improve mowing quality and service life. This series still meets the requirements of a simple and user-friendly machine. The cutter bar has the pivot point on the left, making it easy to mow the slope or slope.

The new 10-series disc mowers feature the 100-series cutter bar:

• Famous worldwide for its cutting quality and reliability.
• 100% of the surface of the cutter discs has been treated to prevent wear.
• equipped with PROTECTADRIVE to protect the cutter bar drive chain.
• disc bearing can be replaced quickly and easily to limit downtime during peak season.

A swath wheel is mounted behind the outer swath disc, separating mowed grass from the uncut crop, so that the right wheels of the tractor run over the ground and not over the cut crop.

Advantages of swath wheels compared to swath boards:

• swath wheels fit completely under the swath cloth;
• swath wheels do not touch the ground;
• no damage when reversing or turning.

• KUHN GMD 240, 280 en 310 disc mowers

The Kuhn GMD 100-series disc mowers are designed to better respond to the increasingly intensive working conditions, such as larger plots, higher cutting speeds and higher transport speed. The cutter bar has the pivot point on the left-hand side, making it easy to mow the slope on or off.

The new 100-series disc mower is equipped with the 100-series cutter bar:

• Famous worldwide for its cutting quality and reliability.
• 100% of the surface of the cutter discs has been treated to prevent wear.
• equipped with PROTECTADRIVE to protect the cutter bar drive chain.
• disc bearing can be replaced quickly and easily to limit downtime during peak season.

The distance between the cutter bar and the rear wheels of the tractor is very small, so that changes can be made to the soil quickly. Greater ground clearance under the protective cover and swath makes it easier to mow the crop and ensure a good separation between mowed and unmown crops.

There is an additional bracket between the drive and cutter bar reinforcement to reduce the load on the cutter bar. The models from the 100 series have a new frame, a new extension frame and bronze bushes to increase the mechanical strength. Including reinforced protective cover for more safety.

Due to the mobility of the hinged cutter bar that is connected to a longer cylinder, mowing of hilly terrain is possible up to a slope of 35°, depending on the model. The machines are equipped with a new hydraulic limit valve for smooth lifting of the machine at the headland.

Option: to fold the mower hydraulically backwards in the transport position so that the driver does not have to leave the tractor to fold up the front cover.

• KUHN GMD 240 HD, 280 HD  en 310 HD disc mowers

The GMD 240 HD, 280 HD and 310 HD are basically the same as the GMD 240, 280 and 310. The difference is in the HD cutter discs instead of the normal cutter discs.

The HD mowing discs have a smaller diameter than the standard mowing discs and have longer mowing blades, creating the same mowing circle. The HD mowing discs fall within the sliding fabrics, making them less likely to come into contact with unwanted objects. The HD cutter disc is made of thicker steel with a thickening at the location of the blades. The mower disc bearing is additionally protected by an extra ring on the bottom of the disc.

The HD mowing discs are suitable for mowing in harsh conditions such as roadside verges or fallow land. Inquire about the options at your Kuhn dealer.

• KUHN GMD 350 disc mowers

The Kuhn GMD 350 is the top model from the series of disc mowers without conditioner with side suspension of the cutting unit. With this top model the ground pressure of the cutter bar is adjusted hydrau-pneumatically.

The GMD 350 is equipped with the new OPTIDISC 1000 series cutter bar. This is characterized by an uneven center distance between the mowing discs. The discs rotating toward each other are farther apart than discs rotating apart. This results in an even better cut. With eight cutting discs, the GMD 350 achieves a working width of 3.51 m.

• KUHN GMD 2811, 3111 en 3511 LC disc mowers

More than ever, high-quality feed forms the basis for any efficient, profitable and solid agricultural business. The mowers from the Kuhn 1011 series have important features, from LIFT-CONTROL to OPTIDISC, for optimum performance when it comes to profitability.

If the pressure on the cutter bar increases with the hydropneumatic LIFT-CONTROL suspension, the cutter bar is automatically relieved.
The higher the load, the lighter the cutter bar becomes. This has clear advantages:

• a constant bottom pressure;
• a non-stop obstacle protection, cutting unit is lifted when hitting an obstacle;
• an accurate soil adjustment;
• less soil in the silage;
• minimal damage to the turf.

The performance of a suspension system is at stake if the weight distribution over the ground is not the same everywhere. With the GMD 1011 series, the mowing unit is suspended in the center of gravity to ensure that the weight is evenly distributed and a high-quality and regular mowing result can be achieved across the entire width.

• KUHN GMD 4011 en 4411 LIFT-CONTROL disc mowers

More than ever, high-quality feed forms the basis for any efficient, profitable and solid agricultural business. The mowers from the Kuhn 1011 series have important features, from LIFT-CONTROL to OPTIDISC, for optimum performance when it comes to profitability. The GMD 4011 and 4411 are the two largest models in the GMD 1011 series and have an additional cylinder for (adjustable) damping of the cutting unit during transport.

If the pressure on the cutter bar increases with the hydropneumatic LIFT-CONTROL suspension, the cutter bar is automatically relieved.
The higher the load, the lighter the cutter bar becomes. This has clear advantages:

• a constant bottom pressure;
• a non-stop obstacle protection, cutting unit is lifted when hitting an obstacle;
• an accurate soil adjustment;
• less soil in the silage;
• minimal damage to the turf.

The performance of a suspension system is at stake if the weight distribution over the ground is not the same everywhere. With the GMD 1011 series, the mowing unit is suspended in the center of gravity to ensure that the weight is evenly distributed and a high-quality and regular mowing result can be achieved across the entire width.

• KUHN LIFT-CONTROL

The LIFT-CONTROL system is much more than just a cutter bar relief. The conventional relief spring has been replaced by a hydraulic cylinder and accumulators. The distinctive plus of the LIFT-CONTROL system is the specialist and exclusive Kuhn technology. The engineers at Kuhn have developed a hydropneumatic beam pressure setting that constantly adapts to the impact on the cutter bar.

When the cutter bar glides over the ground, it experiences this resistance, the higher this force becomes, the stronger the relief of the cutter bar is due to the unique and exclusive LIFT-CONTROL technique. This results in a cleaner crop