Kuhn 1 rotor-rake GA 300 GM tm GA 5031 T

Kuhn offers a very wide range of circular rakes that starts with the smaller single rotor models. These machines are suitable for small to medium-sized farmers who are looking for a simple machine.

• GA 300 GM: a classic that has proven itself

The GA 300 GM is the smallest rake in the Kuhn rake range. Simplicity and proven constructions make the GA 300 GM an extremely reliable machine.

• GA 3201 GM: practical to use

With nine tine arms, the GA 3201 GM achieves a working width of 3.20 m. The removable tine arms ensure a limited transport width. A rake with lowered tine arms also takes up little space during storage.

Like all other Kuhn rotary rakes with manually foldable protection brackets, the GA 3201 GM is equipped with a rotor lock as standard. As soon as the protective wings are folded up, the rotor is locked and can no longer rotate. If the PTO shaft is accidentally engaged, the slip clutch ensures that the rotor does not start to rotate.

The patented swath board can be adjusted very easily and without tools using a parallelogram. If it is moved further away from the rake element, it automatically adjusts to the rear. In this way the swath board is always in the most favorable position for the crop in question.

• GA 3801 GM: maximum capacity under 3 m rotor diameter

With ten tine arms and a rotor diameter of 2.98 m, the GA 3801 GM has a working width of 3.80 m. Completely closed drives, removable tine arms and a swathboard controlled by a parallelogram are the most special features of the GA 3801 GM.

• De GA 4121 en 4321: for the highest demands

The models GA 4121 GM (10 tine arms, 4.10 m) and GA 4321 GM (12 tine arms – 4.20 m) perform at top level. The many tine arms make high driving speeds possible, without having to compromise on the quality of the work. The crop is optimally absorbed by the tangential placement and specially shaped tine arms with Kuhn patent. This is how well-formed, very airy windrows are created. With both models, the new, exclusive and patent-protected MASTERDRIVE® drive ensures a smooth running. This way you can work in peace.

• GA 4431, 4731 en 5031 circle rakes

The GA 4431 (12 tine arms, 4.40 m), GA 4731 (13 tine arms, 4.65 m) and GA 5031 (15 tine arms, 5 m) perform at the highest level. The many tine arms make high driving speeds possible without having to compromise on the quality of the work. The crop is optimally absorbed by the tangential positioning and specially shaped tine arms with Kuhn patent. This is how well-formed, very airy windrows are created. The new models are equipped with the new, exclusive and patent-protected MASTERDRIVE GIII® drive for smooth running and reinforced tine arm mounting.

• GA 4731 T en 5031 T

The GA 4731 T and GA 5031 T are equipped with a hydraulically liftable chassis and drawbar. This machine is not suspended in the tractor’s lift, but is only pulled by the tractor as the machine has its own chassis. This construction enables people with a small tractor with limited lifting capacity to work with a large single rotor rake.